Skip navigation
Please use this identifier to cite or link to this item: http://elar.nung.edu.ua/handle/123456789/5059
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBuketov, A. V.-
dc.contributor.authorSmetankin, S. A.-
dc.contributor.authorZinchenko, D. A.-
dc.date.accessioned2017-09-19T11:09:33Z-
dc.date.available2017-09-19T11:09:33Z-
dc.date.issued2016-
dc.identifier.citationTemperature impact upon structural and thermal physical properties of epoxy composites modified with 4,4-sulfonil bis (4,1-phenylene) bis (n,n-diethyldithiocarbamate) = Вплив температури на структуру і теплофізичні властивості епоксидних композитів, модифікованих 4,4-сульфонілбіс (4,1-фенилен) біс (n,n-діетилдітіокарбаматом) / A. V. Buketov, S. A. Smetankin, D. A. Zinchenko // Journal of Hydrocarbon Power Engineering. - 2016. - Vol. 3, № 2.uk_UA
dc.identifier.issn2311-1399-
dc.identifier.urihttp://elar.nung.edu.ua/handle/123456789/5059-
dc.description.abstractThe effect of the 4.4-sulfonilbis (4,1-phenylene) bis (n,n-diethyldithiocarbamate) (C22H28N2O2S5) modifier on the thermal properties of the epoxy bisphenol oligomer ED-20 within the temperature range ΔT = 303–873 K has been defined. The heat resistance by Martens, thermal expansion coefficient, glass transition temperature and shrinkage have been studied. As the result of the acquired data analysis, the optimum concentration of the C22H28N2O2S5 modifier, significantly improving the thermal properties of epoxy composite, has been set. It has been demonstrated that in order to get a composite material (CM) or a protective coating with enhanced thermal properties, it is necessary to introduce the optimum amount of modifier into the epoxy binder (q = 0.10–0.25 mass parts out of 100 % ED-20 resin). In this case, the composite is formed with the heat resistance value by Martens of T = 362 K. On the basis of experimental studies of thermal properties using modern research methods such as differential thermal analysis (DTA) and thermogravimetric analysis (TGA) the allowable temperature limits at which it is possible to use modified epoxy composites have been set. СM with the entered modifier of q = 0.75 mass parts and T0 = 601.8 K is characterized by the biggest destruction temperature value if compared with the matrix (T0 = 600.1 K). The difference between the minimum and the maximum value is only ΔT0 = 1.7 K, which indicates insignificant positive impact of modifier upon the initial destruction temperature. Using DTA curves exothermic effects when exposed to the thermal field within the temperature range of CM ΔT = 591.3–683.7 K have been defined. It has been found out that the maximum values of exothermic peak, if compared with the matrix (Tmax = 618.3 K) are Tmax = 626.6–641.0 K, and they are characteristic for СM, filled with the C22H28N2O2S5 modifier in an amount of q = 0.50–0.75 mass parts. The difference between the minimum (matrix component) and the maximum value is ΔTmax = 22.7 K, which (within experimental error) shows a significant positive impact of the modifier upon the maximum exoeffect value. It is said to increase the thermal stability of CM, which in its turn, is due to the stability of physical and chemical bonds in the material, providing improved physical and mechanical properties of materials under the impact of rising temperatures.uk_UA
dc.description.abstractВстановлено вплив модифікатора 4,4-сульфонілбіс (4,1-фенилен) біс (n,n-діетилдітіокарбамата) (C22H28N2O2S5) на теплофізичні властивості епоксидної матриці в діапазоні температур ΔТ = 303–873 К. Досліджено теплостійкість за Мартенсом, термічний коефіцієнт лінійного розширення, температуру склування та усадку модифікованої матриці. В результаті аналізу одержаних даних встановлено оптимальну концентрацію C22H28N2O2S5 модифікатора, що вагомо покращує теплофізичні властивості епоксидної матриці. Показано, що для формування композитних матеріалів (КМ) або захисних покрить із підвищеними показниками теплофізичних властивостей необхідно в епоксидне в’яжуче ввести оптимальний вміст модифікатору q = 0.10–0.25 масових частин на 100 масових частин смоли ЕД-20. У такому випадку формується композит зі теплостійкістю за Мартенсом Т = 360–362 К. На основі експериментального вивчення теплофізичних властивостей із використанням методів диференціально-термічного (ДТА) і термогравіметричного (ТГА) аналізу визначено допустимі межі температури, для яких можна використовувати модифіковані епоксидні композити. Найбільшим значенням температури початку деструкції у порівнянні з матрицею (Т0 = 600.1 К) характеризується КМ із вмістом модифікатору q = 0.75 масових частин і показником Т0 = 601.8 К. Різниця між мінімальним і максимальним значенням складає всього ΔТ0 = 1.7 К, що вказує на незначущий позитивний вплив модифікатору на початкову температуру деструкції. З допомогою кривих ДТА виявлено екзотермічні эфекти в результаті дії теплового поля на КМ у діапазоні температур ΔТ = 591.3–683.7 К. Встановлено, що максимальні значення екзоефектів у порівнянні з матрицею (Тmax = 618.3 К) складають Тmax = 626.6–641.0 К і характерні для КМ із вмістом q = 0.50–0.75 масових частин модифікатора СФЕК. Різниця між мінімальним (показник матриці) і максимальним значеннями складає ΔТmax = 22.7 К, що вказує на значний позитивний вплив модифікатору на максимальну величину екзоефекту. Це свідчить про підвищення термостабільності КМ, що зумовлено стійкістю фізико-хімічних зв’язків у матеріалі і покращенням його фізико-механічних властивостей в умовах дії високих температур.uk_UA
dc.language.isoenuk_UA
dc.publisherІФНТУНГuk_UA
dc.subjectепоксидний композитuk_UA
dc.subjectмодифікаторuk_UA
dc.subjectтемпература склуванняuk_UA
dc.subjectтермостійкістьuk_UA
dc.subjectусадкаuk_UA
dc.subjectepoxy compositeuk_UA
dc.subjectheat resistanceuk_UA
dc.subjectglass transition temperatureuk_UA
dc.subjectshrinkageuk_UA
dc.subjectmodifieruk_UA
dc.titleTemperature impact upon structural and thermal physical properties of epoxy composites modified with 4,4-sulfonil bis (4,1-phenylene) bis (n,n-diethyldithiocarbamate)uk_UA
dc.title.alternativeВплив температури на структуру і теплофізичні властивості епоксидних композитів, модифікованих 4,4-сульфонілбіс (4,1-фенилен) біс (n,n-діетилдітіокарбаматом)uk_UA
dc.typeArticleuk_UA
Appears in Collections:Journal of Hydrocarbon Power Engineering. - 2016. - Vol. 3, № 2

Files in This Item:
File Description SizeFormat 
5733p.pdf781.13 kBAdobe PDFView/Open
Show simple item record   Google Scholar


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.