Skip navigation
Please use this identifier to cite or link to this item: http://elar.nung.edu.ua/handle/123456789/2938
Title: Методика гідравлічного розрахунку кільцевих газових мереж низького тиску із зосередженим відбором газу
Authors: Ксенич, А. І.
Середюк, М. Д.
Височанський, І .І.
Keywords: газові мережі населених пунктів
низький тиск
розрахункова витрата
гідравлічний розрахунок
gas distribution networks of settlements
low pressure
design flowrate
hydraulic calculation
Issue Date: 2015
Publisher: ІФНТУНГ
Citation: Ксенич, А. І. Методика гідравлічного розрахунку кільцевих газових мереж низького тиску із зосередженим відбором газу / А. І. Ксенич, М. Д. Середюк, І. І. Височанський // Розвідка та розробка нафтових і газових родовищ. - 2015. - № 1. - С. 97-104.
Abstract: Нормативні методи прогнозування розподілу газу в системах газопостачання низького тиску з сталевих та поліетиленових труб не описують достовірно наявні газодинамічні процеси. Зокрема похибка обчислення перепаду тиску газу за умови використання моделі рівномірного безперервного розподілу газу по довжині газопроводу може досягати 70 % залежно від технологічних параметрів роботи ділянки. Запропоновано уточнену методику розрахунку проектних та експлуатаційних параметрів роботи кільцевих газових мереж низького тиску на основі моделі зосередженого відбору газу по довжині газопроводів. Розроблений алгоритм реалізовано в сучасному програмному забезпечені. Шляхом комп’ютерного моделювання проведено апробацію на моделі системи газопостачання населеного пункту з поліетиленових труб та досліджено вплив зосередженого відбору газу на проектні та експлуатаційні параметри роботи ділянок мережі. Отримані результати гідравлічних розрахунків засвідчили необхідність збільшення діаметрів деяких ділянок газової мережі з метою попередження аварійних режимів її роботи.
The normative methods for forecasting of gas distribution in the low-pressure gas supply networks, made of steel and polyethylene pipes, do not describe the existent gas-dynamic processes correctly. In particular, the error of gas pressure drop calculations using the model of even gas distribution along the pipeline can be equal to 70 % depending on the pipeline section operating parameters. In this paper a revised methodology for calculating design and operating parameters of the circular low-pressure gas distribution networks is presented taking into account the model of focused gas extraction along the gas pipelines. The developed algorithm is implemented with the help of the modern software. Using computer modeling, the procedure was tested on the model of a settlement gas supply system, made of polyethylene pipes, and the influence of the focused gas extraction on the design and operating parameters of the network sections was studied. The obtained results of the hydraulic calculations showed that there was a necessity of increasing the diameter of some gas network pipeline sections in order to prevent its emergency operation.
URI: http://elar.nung.edu.ua/handle/123456789/2938
Appears in Collections:Розвідка та розробка нафтових і газових родовищ - 2015 - №1

Files in This Item:
File Description SizeFormat 
4899p.pdf1.93 MBAdobe PDFView/Open
Show full item record   Google Scholar


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.