Skip navigation
Please use this identifier to cite or link to this item: http://elar.nung.edu.ua/handle/123456789/6530
Title: Удосконалення ротаційного віскозиметра для вимірювання концентрації паперової маси
Authors: Романюк, О. М.
Крих, Г. Б.
Кріль, Б. А.
Кріль, О. В.
Keywords: вимірювання концентрації паперової маси
ротаційний віскозиметр
неньютонівські рідини
вимірювання в'язкості
коефіцієнт консистенції
індекс течії
ефективна в'язкість
pulp consistency measurement
rotational viscometer
non-Newtonian liquids
viscosity measurement
flow consistency index
flow behavior index
apparent viscosity
Issue Date: 2017
Publisher: ІФНТУНГ
Citation: Удосконалення ротаційного віскозиметра для вимірювання концентрації паперової маси / О. М. Романюк, Г. Б. Крих, Б. А. Кріль, О. В. Кріль // Методи та прилади контролю якості. - 2017. - № 2. - С. 47-54.
Abstract: Запропоновано спосіб проведення вимірювань в'язкості неньютонівських рідин за допомогою ротаційного віскозиметра, який дає змогу визначити коефіцієнт консистенції рідини K та індекс течії n у степеневому законі Оствальда де Веле σ = K (ý)n. Спосіб також дає змогу усунути вплив моменту сил тертя в ущільненні осі чутливого елемента та у підшипниках на результати вимірювань. Для цього у запропонованому способі проводять вимірювання моменту сили, що діє на чутливий елемент при підході до вибраних для вимірювання частот обертання чутливого елемента зі сторони нижчих частот та зі сторони вищих частот. Отримані значення моменту сили усереднюють. Вимірювання проводять на двох наперед заданих частотах обертання чутливого елемента. Частоту обертання чутливого елемента програмовано змінюють за допомогою частотного перетворювача.
The method of measuring of viscosity of the non-Newtonian liquids by means of rotational viscometer, which gives the possibility to determine the flow consistency index рідини K and the flow behavior index n in Ostwald-de Waele power law σ = K (ý)n. The method gives the opportunity to remove the impact of the frictional torque in the sensor shaft sealing and in the shaft bearings on the measuring results. For this purpose in the method proposed the torque acting on the sensor is measured at the approach of the sensor rotation frequency to the selected for carrying out the measurement value on the side of the lower lying frequency, and on the side of the higher lying frequency. The two obtained torque values are then averaged out. The measurements are carried out at two predetermined sensor rotation frequencies. The sensor rotation frequency is programly changed by means of the variable speed drive.
URI: http://elar.nung.edu.ua/handle/123456789/6530
Appears in Collections:Методи та прилади контролю якості - 2017 - № 39

Files in This Item:
File Description SizeFormat 
5941p.pdf1.92 MBAdobe PDFView/Open
Show full item record   Google Scholar


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.