|Title:||Optimization of the differential pressure flowmeters by means of "RASKHOD-RU" CAD|
|Other Titles:||Оптимізація витратомірів перепаду тиску за допомогою "RASKHOD-RU" CAD|
|Publisher:||Ivano-Frankivsk National Technical University of Oil and Gas|
|Citation:||Pistun, Ye. Optimization of the differential pressure flowmeters by means of "RASKHOD-RU" CAD = Оптимізація витратомірів перепаду тиску за допомогою "RASKHOD-RU" CAD / Ye. Pistun, L. Lesovoy, R. Fedoryshyn // Journal of Hydrocarbon Power Engineering. - 2014. - Vol. 1, № 1. - P. 53-57.|
|Abstract:||New methodology of designing of the differential pressure flowmeters, which are optimal as to the accuracy of flowrate measurement is developed in order to provide minimum uncertainty of flowrate measurement results. This methodology is implemented in "Raskhod-RU" CAD system for computer aided design and calculation of differential pressure flowmeters. "Raskhod-RU" CAD meets the requirements of the new Standards (DSTU GOST 8.586.1,2,3,4,5-2009 and GOST 8.586.1,2,3,4,5-2005) and provides accomplishment of the following tasks: verification of conditions (constraints) for the application of the differential pressure method according to the requirements of the new Standards; calculation of primary device parameters, pipe straight lengths and flowmeter in general according to the requirements of the new Standards; calculation of uncertainty of fluid flowrate and volume measurement results; design of an optimal flowmeter as to the accuracy of flowrate measurement.|
|Appears in Collections:||Journal of Hydrocarbon Power Engineering. - 2014. - Vol. 1, № 1|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.